Graco ProMix 2KS - Koehler Rubber & Supply

To Order Call:
216.749.5100216.749.5100

Graco’s two- and three-component proportioners offer precise and reliable electronic plural component proportioners for a broad range of solventborne, waterborne, and acid catalyzed materials. From entry level to upgraded applications, the ProMix 2KS and 3KS systems provide flexibility and increased efficiency.

Offers the highest degree of ratio assurance
Provides critical process variable feedback
Built in system safeguards
Effective color change solution
Efficient material tracking and reporting

Manual and automatic configurations
Intrinsically safe fluid panels easily integrate into hazardous areas
Single- or multi-color and catalysts
Accurate ratio assurance for superior finish quality
Simple programming allows fast set up and efficient process control
Advanced web interface provides consolidated system management and reporting

ProMix 2KS Manual System
Maximum working air pressure	100 psi
Air supply	75–100 psi
Air filter inlet size	3/8 npt(f)
Air filtration for air logic and purge air (Graco-supplied)	5 micron (minimum) filtration required; clean and dry air
Air filtration for atomizing air (user-supplied)	30 micron (minimum) filtration required; clean and dry air
Mixing ratio range	0.1:1–50:1
Fluids handled	one or two component: solvent and waterborne paints, polyurethanes, epoxies, acid catalyzed varnishes, moisture sensitive isocyanates
Viscosity range of fluid	20–5000 cps
Fluid filtration (user-supplied)	100 mesh minimum
External power supply requirements	85–250 Vac, 50/60 Hz, 2 amps maximum draw, 15 amp maximum circuit breaker required, 8 to 14 AWG power supply wire gauge
Operating temperature range	41–122°F
Environmental conditions rating	indoor use, pollution degree (2), installation category II
Wetted parts	303 and 304 stainless steel, Tungsten carbide (with nickel binder), perfluoroelastomer, PTFE
Maximum fluid working pressure
Base system	4000 psi
Low pressure color change	300 psi
High pressure color change	3000 psi
Coriolis Meter	2300 psi
Fluid Flow Rate Range
G3000, G250 Meter	0.02–1.00 gpm
G3000HR, G250HR Meter	0.01–0.50 gpm
Coriolis Meter	0.005–1.00 gpm
S3000 Solvent Meter (accessory)	0.01–0.50 gpm
Fluid Porting
Flow Meter Fluid Inlet	1/4 npt(f)
Dose Valve/Color Valve Adapter Inlets	1/4 npt(f)
Fluid Outlet Size (static mixer)	1/4 npt(f)
Noise Level
Sound pressure level	below 70 dBA
Sound power level	below 85 dBA

ProMix 2KS Automatic System
Maximum working air pressure	100 psi
Air supply	75–100 psi
Air filter inlet size	3/8 npt(f)
Air filtration for air logic and purge air (Graco-supplied)	5 micron (minimum) filtration required; clean and dry air
Air filtration for atomizing air (user-supplied)	30 micron (minimum) filtration required; clean and dry air
Mixing ratio range	0.1:1–50:1
On-ratio accuracy	up to +/- 1%, user selectable
Fluids handled	one or two component: solvent and waterborne paints, polyurethanes, epoxies, acid catalyzed varnishes, moisture sensitive isocyanates
Viscosity range of fluid	20–5000 cps
Fluid filtration (user-supplied)	100 mesh minimum
External power supply requirements	85–250 Vac, 50/60 Hz, 2 amps maximum draw, 15 amp maximum circuit breaker required, 8 to 14 AWG power supply wire gauge
Operating temperature range	41–122°F
Environmental conditions rating	indoor use, pollution degree (2), installation category II
Wetted parts	303 and 304 stainless steel, Tungsten carbide (with nickel binder), perfluoroelastomer, PTFE
Maximum fluid working pressure
Base system	4000 psi
Low pressure color change	300 psi
Coriolis Meter	2300 psi
RoboMix system	190 psi
Flow control	190 psi
Fluid Flow Rate Range
G3000, G250 Meter	0.02–1.00 gpm
G3000HR, G250HR Meter	0.01–0.50 gpm
Coriolis Meter	0.005–1.00 gpm
S3000 Solvent Meter (accessory)	0.01–0.50 gpm
Fluid Porting
Flow Meter Fluid Inlet	1/4 npt(f)
Dose Valve/Color Valve Adapter Inlets	1/4 npt(f)
Fluid Outlet Size (static mixer)	1/4 npt(f)
Noise Level
Sound pressure level	below 70 dBA
Sound power level	below 85 dBA