Graco HFR Hydraulic Fied Ratio Meter Mix And Dispense System

To Order Call:
216.749.5100216.749.5100

Engineered for versatility, the Graco HFR Metering System packs advanced technologies and precision dispensing into one compact, affordable system.

With its accuracy and repeatability, the Graco HFR lets you hit a specific ratio and volume – the first time, and every time. You reduce scrap and rework with accurate, on-ratio dispensing.

The Graco HFR Metering System is one of the first modular, configurable systems in the polyurethane processing equipment marketplace. While other systems are custom designed for specific applications, the Graco HFR Metering System is modular and offers more technology for a lower capital investment than traditional custom RIM equipment.

Configure the components essential for your application

Select what you need for your material and application – no more, no less
Faster lead times – configured equipment solutions are delivered to your door faster than a custom engineered solution
Easier maintenance with standard parts
Service is there when you need it through Graco’s global distribution network

HFR
Honda GX 200 Engine
ANSI Power Rating @ 3600 rpm	6.5 Horsepower
Maximum Working Pressure
Base Coat Pump	1000 psi
Top Coat Pump	3300 psi
Noise Level
Sound Power	105 dBa per ISO 3744
Sound Pressure	96 dBa measured at 3.1 ft
Maximum Delivery Rating
Base Coat Pump	3.0 gpm
Top Coat Pump	2.20 gpm
Maximum Tip Size
Base Coat Pump	1 applicator with .071 in. tip
Top Coat Pump	1 gun with 0.048 in. tip, 2 gun with 0.035 in. tip, 3 gun with 0.027 in. tip, 4 gun with 0.023 in. tip
Inlet Paint Strainer
Base Coat Pump	2 in. npsm, #5 mech sst
Top Coat Pump	1 in. npsm, #8 mesh sst
Pump Inlet Size
Base Coat Pump	2 in. QD Camlock male coupler
Top Coat Pump	1 in. – 11.5 npsm
Fluid Outlet Size
Base Coat Pump	1 in. QD Camlock male coupler
Top Coat Pump	3/8 npsm
Wetted Parts
Wetted Parts	zinc-plated carbon steel, PTFE, nylon, polyurethane, UHMW, polyethylene, luoroelastomer, acetal, leather, aluminum, tungsten carbide, nickel- and zinc-plated carbon steel, stainless steel, chrome plating

HFR
Maximum Fluid Working Pressure	3000 psi
Maximum Fluid Temperature	190°F
Fluid Inlet Feed Pressure Range	50 psi to 250 psi
Fluid Inlets
Component A (Red)	1/2 npt(f)
Component B (Blue)	3/4 npt(f)
Fluid Outlets
Component A (Red)	#8 (1/2 in.) JIC (3/4-16 unf), with #5 (5/16 in.) JIC adapter
Component B (Blue)	#10 (5/8 in.) JIC (7/8-14 unf), with #6 (3/8 in.) JIC adapter
Fluid Circulation Ports	1/4 npsm(m), with plastic tubing, 250 psi maximum
Line Voltage Requirement	230V / 1 phase and 230V / 3 phase Models: 195-264V, 50/60 Hz400V / 3 phase: 360-440V, 50/60 Hz
Amperage Requirement	See Models in instruction manual 313997
Sound Power	93 dB
Heater Power
A (Red) and B (Blue) heaters total, no hose, Heated HFR Models only	12kW
Hydraulic reservoir capacity	9 gal
Recommended hydraulic fluid	Citgo A/W Hydraulic Oil, ISO Grade 46
Weight
Units with 12 kW Heaters	868 lb
Units without heaters	634 lb
Wettet Parts	Aluminum, stainless steel, zinc-plated carbon steel, brass, carbide, chrome, fluoroelastomer, PTFE, ultra-high molecular weight polyethylene, chemically resistant o-rings
All other brand names or marks are used for identification purposes and are trademarks of their respective owners.